How to change your business address on Google Maps without losing rankings (and prove it)
Almost every guide out there stops at "edit the address and wait". None of them mention that your radius gets recalculated from the new point, or show you how to measure whether you came out ahead or behind. This one covers both: the full procedure and the before/during/after measurement protocol.
TL;DR
- ✓ Moving means editing your Business Profile, not creating a new one. Reviews, photos and tenure carry over; what changes is the point Google measures distance from.
- ✓ Once you edit the address, Google requires re-verification. Up to 5 business days of review, a postcard in about 14 days, a code valid for 30 days.
- ✓ Your radius is recalculated from the new address. You gain some areas, lose others, and your immediate competitors change. It is not a listing error.
- ✓ Add your keywords 3-4 weeks before you move. History is not retroactive — with no baseline, you have nothing to compare against afterward.
- ✓ Measure daily for 4-6 weeks after re-verification, comparing the old city and the new one before drawing any conclusions.
Before you touch anything: moving means editing your profile, not creating a new one
Changing your business address on Google Maps has exactly one correct answer, and it is deliberately boring: you edit the address on the same Business Profile and Google asks you to re-verify. That is the whole trick. What editing preserves, instead of starting a new profile, is three things that take real time to rebuild: your reviews, your photos and your listing's tenure. What does change is the exact point Google uses to calculate how close you are to each person searching, and that has consequences we get into further down.
Before going further, it is worth separating three situations that get confused with a move and are not one. The first is opening a new location without closing the old one — that is not a move, it is adding a location, and each site needs its own profile; that process has its own rules and is not covered here. The second is fixing a pin that landed in the wrong spot on your current address, with no actual relocation involved — that is a listing problem, not a move, and we cover it in the guide on why a business does not show on Google Maps from another part of town. The third is dropping a physical storefront to operate as a service-area business, which has its own procedure and gets answered in this guide's FAQ.
The second half of this post covers what almost no guide mentions: a move is an event you can measure, with a concrete before and after. With daily history and ranking-drop alerts from a rank tracker, you can hold a baseline from before the move and a real comparison afterward, instead of being left with a feeling of "I think I dropped" and no number to back it up.
How to change your business address on Google Maps, step by step
There are three ways into the same form, and any of them works: business.google.com with the account that owns the listing, your profile from Google Search (search your business name while signed into the account that manages it, and an edit option appears), or the Google Maps app, under the Business section. All three lead to the same form, so use whichever is handiest.
Steps to change your address (double-check the exact menu labels in your interface — Google adjusts them often)
- Sign in with the owner account at business.google.com, your Google Search profile, or Google Maps > Business.
- Choose Edit profile > Location > Address.
- Enter the complete, precise address of the new location. Virtual offices are not accepted.
- Adjust Address and pin location until the marker sits exactly on the real front door.
- Save without touching your name, category, phone number or hours in the same move.
- Complete whichever re-verification Google requests: call or text, email, video or postcard.
- Check the status of your edit on the profile itself until the new address goes live.
- That same day, update your website, Waze, Apple Business Connect and your directory listings.
Two points deserve a separate note because they are where most people trip up. The first is not dragging the old address along by accident: write the full street, number, neighborhood and postal code, not just the shorthand locals use to find you. The second is the pin: Google treats the written address and the exact map point as two separate fields, and both need adjusting. Change only the text and leave the pin where it was, and your listing still shows up geographically at the old spot no matter what the written address says.
To get the pin right, the simple trick is to zoom the map in as far as it goes before dropping the marker: at street level it is easy to mix up your storefront with the one next door, and while that gap of a few meters matters less to search than you might think, it can absolutely confuse a customer walking a route to reach you.
The mandatory re-verification: what Google asks for and how long it can take
Google's Business Profile Help Center is direct about this: "you'll need to reverify your business" if you relocate after already being verified once. It is not optional and it does not scale with the size of the move — it applies the same whether you moved two blocks or changed cities. On timing, the same Help Center says something worth keeping in mind so you do not panic: "we review your edits before updating them on your profile", without committing to a fixed deadline.
What does come with published numbers are the re-verification methods themselves. Google may ask for a call or text to the listing's phone number, an email with a link, a short video of the location, or a physical postcard with a code. Review of the change can take up to 5 business days; if you get the postcard, it usually arrives in about 14 days, and the code it carries is valid for 30 days from when it is generated. One detail people often miss: if you change your name, address or category again while a code is pending, that code stops working and you have to start over.
A practical tip to avoid wasting time: if you know the video option is likely, record it before you start the process. A short clip showing the sign with your name clearly visible, the storefront or street the location sits on, and something proving you genuinely operate there — a register, work tools, a counter full of stock — is usually enough. Having it ready ahead of time saves you the days that slip by while you scramble to figure out how to film it.
What not to do when changing your business location on Google Maps
Most of the problems that show up after a move do not come from the procedure itself — they come from a shortcut someone took to "speed things up". This table covers the five most common mistakes.
| Don't do this | Do this instead | Why |
|---|---|---|
| Create a new listing at the new address | Edit the address on the existing profile | Reviews stay on the old one, and you create a duplicate Google filters out |
| Mark the old profile as permanently closed | Edit the address instead of closing and reopening | Closing transfers nothing to any new profile |
| Change your name, category or phone at the same time as the address | One change at a time | Invalidates a pending re-verification code and breaks the before/after comparison |
| Use a virtual office or rented address as your location | The real address where you operate | Google's guidelines say these "are not eligible" |
| Leave the old address live on your website | Update it the same day Google publishes the change | A mismatched address between your listing and your site is a confusing signal |
Stacking several changes into one edit deserves its own warning, because it usually comes from good intentions: since you are already in the listing, why not also try a new category or fix the business name. Do not do it in the same move. If your ranking shifts four weeks later, you will not be able to tell whether it was the relocation, the category, or the name — and a tangled experiment like that teaches you nothing for next time.
After the change: your website, directories, and everything that still shows the old address
The same day Google publishes your new address, there is a short list of places that do not update themselves and are worth reviewing in one sitting. On your own site: the footer, the contact page and, if you run LocalBusiness structured data, that block too — walking through how to edit it is outside the scope of this guide, but it is worth a reminder that it exists and that Google reads it.
Off your site, every map runs its own system, and none of them sync with your Google Business Profile. Waze has its own Map Editor, reviewed by community editors. Apple Maps is managed through Apple Business Connect. Then come whatever directories you are listed on and your social profiles, which almost always have an address field someone filled in once and forgot about. Treat these as a separate checklist, not something that "sorts itself out".
If, while going through that list, you find your name, address or phone number do not match across two or more of these sites — known as a NAP inconsistency — that is a separate problem worth fixing, and we cover it in more detail in the guide on businesses not showing on Google Maps from another part of town.
One last warning, because it happens more often than you would think: if you are using the physical move as an excuse to also switch domains or migrate your site to another platform, separate the two in time. Stacking a business relocation on top of a site migration leaves you with two overlapping experiments and no clean way to tell which one caused what.
What nobody tells you: your radius gets recalculated from the new address
Every how-to guide out there ends at the re-verification step, as if that closes the subject. But Google's own Help Center explains something rarely connected back to a move: "distance indicates how far each potential search result is from the location term used in a search", and it is one of the factors ranking who shows up first in the local pack. That calculation does not freeze in place — it runs constantly, from whatever address your listing carries at the time.
In practice that means your move redistributes your visibility rather than raising or lowering it evenly. You gain ground on searches made near the new location, and lose the ground you held near the old one. Neither of those is a listing error or something to "fix" — it is exactly what is supposed to happen when a business changes location. Mistaking this for a penalty sends a lot of people digging through their listing for an error that does not exist, when what actually changed was geography, not configuration.
As an illustrative example, not an actual case: if you run a business in one part of a city and move across town, it is not just your address on the map that changes. Your immediate competitors change too — you are no longer competing for the local pack against the businesses that were near the old block, but against the ones near the new area, which may never have registered on your radar before because they sat outside your old competitive radius. Once the move settles, it is worth redoing the review comparison against that new set of competitors in the new area, rather than continuing to benchmark against the same businesses as always.
This is the underlying reason relocating a business on Google Maps deserves to be treated as a measurable event, not just an administrative task. If you do not measure before and after, all you are left with is a feeling — "I think I dropped" or "I think I gained" — with no data behind it to say whether the net change was worth it.
Treating the move as an experiment: the before, during and after protocol
Apply the local pack measurement method to one specific moment: the day your address changes.
This protocol does not reinvent anything: it applies the local pack measurement method to one specific moment — the move itself — rather than repeating its general steps and frequencies here. What changes compared to a normal measurement is that here the exact order of the three phases matters.
| Stage | What you do | What you measure | Duration |
|---|---|---|---|
| Before | Add your keywords in the current city (and the destination city, if you're changing cities) | Your daily baseline; in the destination city, your current absence | 3-4 weeks |
| During | Edit the address and pin, re-verify; no other listing changes | Manual check (Pro) the day Google publishes the address, with the date logged | However long review takes |
| After | Update your site and directories; don't touch name or category | Daily measurement: old city versus new, and who took your old spot | 4-6 weeks |
The step most people skip is "before". Adding the keyword the day you move — or worse, after — leaves you with nothing to compare against: you will not be able to tell "this dropped because of the move" from "this was always like this". On Pro, with 6 hours between one manual check and the next, you can force one right before saving the address change and another shortly after Google publishes it, for as clean a cutoff as possible.
If you are changing cities, adding your keywords at the destination before you move carries extra value: the series shows your current absence in that area, exactly the starting point you need to later measure how much ground you gained. Without it, you have nothing to compare against at the destination — only at the origin.
If you're changing cities: how much quota it takes to measure both
In Rankiamos, every keyword-and-city combination consumes one unit of your account's quota. That means measuring the old city and the new one at the same time during the transition does not come free in quota terms, but it does not force you to pay extra either — it simply uses more of the units you already have. Track 10 keywords in your current city and add those same 10 in the destination city, and that is 20 units out of the 50 the Pro plan includes, with no surcharge for running both at once.
Once the "after" measurement window closes — the 4 to 6 weeks the protocol calls for — and you have confirmed the result, remove the old city's keywords and free up that quota. If you also use Pro's "Both" option to measure mobile and desktop, each device consumes its own unit: the same keyword with Both in both cities is 4 units, not 2.
The full protocol — a 3-4 week baseline plus 4-6 weeks of after-measurement — runs two to three months in total. That is longer than the 14-day Pro trial covers, so if you want to run the whole process you need an active subscription, not just the introductory trial. If your market already spans several cities permanently, not just during a move, that is a different case covered in the guide on multi-city SEO rank tracking across the 5-project Pro plan.
What the measurement will not show you
Rankiamos measures the local pack at the city or country level, with no pin grid. If your move is within the same city — one neighborhood to another, not one city to another — the app gives you a single data point for that city, not a neighborhood-by-neighborhood breakdown of how your visibility shifted. As a workaround, you can manually watch for queries that include the new neighborhood's name inside your Google Search Console results, which do come broken out by exact query, though that is a manual check, not an automatic position measurement.
Inside the app, your listing is identified by your website's domain, not by its physical address. That means an address change should not break how your business is recognized in tracking you already have running, since what the app uses to know "this listing is yours" does not change when you move.
Before you decide whether this is right for you, here is the honest version: position history is never retroactive. If you already moved weeks ago and did not measure beforehand, there is no way to recover that "before" — you can only start measuring from today forward. The full protocol in this post calls for Pro across 2-3 months, and the 14-day introductory trial is not enough to cover it. On alerts: Rankiamos notifies you when a keyword enters or exits the top 30, moves up or down, or changes page — but that applies to your organic ranking. We do not promise those alerts specifically cover your position inside the local pack, so if that matters most to you, check it manually during the protocol's weeks. And one more thing worth repeating: the app does not edit your Business Profile or re-verify it with Google on your behalf. That part stays yours, directly inside Google.
How Rankiamos handles it
The product measures your move's before and after. It does not edit your listing or re-verify it — that stays yours inside Google.
Local pack ranking by city (Pro)
Your position within the map block, with name, star rating and review count for the competition, in both the old city and the new one. Measured at the city level, with no pin grid.
History that isn't retroactive
History starts the day you add each keyword. That is why the protocol calls for adding them 3-4 weeks before you move — without that baseline, there is nothing to compare against afterward.
Daily checks and manual refresh (Pro)
Pro measures every day and lets you re-check a keyword by hand every 6 hours — 30 units a day — to pin down the exact day Google publishes your new address. The Free plan measures once a week, with the first check instant when you add the keyword.
Old city and new city, same quota
Every keyword per city is one unit out of the 50 on Pro, with no surcharge for measuring both cities during the transition. When you're done, release the old city's quota whenever you like.
An honest close: none of this replaces the procedure inside Google or spares you the re-verification. What it does solve is the memory problem — having the data from before you moved once you are six weeks into the new location — and the daily-resolution problem, which is what separates "I think I improved" from an actual number. Everything else measured continuously is covered in multi-city rank tracking with no surcharge, and each plan's quota limits are on the pricing page.
Free plan, no card required: 2 projects, 6 keywords · the local pack is a Pro feature, with a 14-day trial that requires an Apple payment method · iPhone · iPad · Apple Watch